UV DTF INSTRUCTIONS & CARE

UV DTF Sticker Application Guide ✨

1️⃣ Prep the Surface: Before applying, use a squeegee to press both the front and back of the wrap.

2️⃣ Clean the Area: Make sure the glass or plastic is free from hand oils (avoid alcohol-based cleaners, as our wraps aren’t alcohol-friendly).

3️⃣ Peel the Design: Carefully remove the design film transfer.

4️⃣ Position with Care: Align the design on your glass or plastic cup and lay it down—once it touches the surface, it cannot be repositioned!

5️⃣ Smooth It Out: Using a squeegee, press from the center outward to remove any bubbles.

6️⃣ Firmly Rub: For best results, rub the applied film thoroughly.

7️⃣ Final Step: Slowly and carefully peel off the clear film to reveal your beautiful design!